Give metal equipment additional microbial protection

Published: 13-Sep-2005


Protective antimicrobial coatings are being increasingly integrated into metal equipment to suppress the growth of bacteria, moulds, mildews and fungi. Some equipment manufacturers in particular see the coatings as having the potential to enhance their brands.

Now the Horizon Business Group (HBG) has teamed up with Thomson Research Associates (TRA) to offer a range of pre- and post-applied antimicrobial metal coatings under the Sureshield umbrella, alongside the TRA's Ultra-Fresh family of antimicrobial technologies, which use environmentally friendly, low VOC compounds to retard microbial growth over the useful life of the metal product. Sureshield with Ultra-Fresh can be applied to virtually any metal finish. Potential applications include: cleanrooms, food preparation furniture, food processing equipment, medical and dental equipment, and many other commercial consumer or industrial products. Ultra-Fresh compounds protect coatings from the germination and growth of micro-organisms by changing the coating to one that is non-conducive to the growth of bacteria, fungi and a range of other micro-organisms. Sureshield can be pre-applied via solvent-based baking enamel to one or both sides of an aluminium, stainless or carbon steel coil. It can also be post-applied via powder or liquid aerosol spray, air spray, airless spray, brush or roller to any type and size of metal area, including: aluminium, brass, carbon steel, chrome, copper, and stainless steel. In addition it provides a long-lasting fingerprint-resistant coating in a wide array of customisable solid colours.

See more

You may also like

Analysis

The case for a facility monitoring system

Read more
In regulated manufacturing, monitoring environmental conditions and critical equipment is essential to protect product quality, yield, and patient safety. Facilities often use a Facility Monitoring System (FMS) to track factors like airborne particles, temperature, and humidity. Beyond regulatory compliance, FMS delivers real business value through reduced waste, improved yield, higher quality, and greater profitability

Trending Articles

  1. AdvanceTEC drives cleanroom innovation & growth with acquisition by Equans Leveraging scale, global reach, technology, prefabrication & modularisation
  2. Medicinal cannabis production with GMP-compliant cleanroom solutions Controlled environments are supporting quality, safety and regulatory compliance in cannabis manufacturing
  3. You need to be a subscriber to read this article.
    Click here to find out more.
    President Trump signs order for “regulatory relief” for domestic pharmaceutical manufacturers The US President has signed an executive order to direct the FDA to review current regulatory procedures, such as by reducing inspection frequency
  4. Pharmaceutical carbon reduction expert EECO2 achieves B Corp status A relatively unique certification in the cleanroom design industry, EECO2 has been determined to meet the necessary high standards of social and environmental performance, transparency, and accountability for B Corporation status
  5. You need to be a subscriber to read this article.
    Click here to find out more.
    Integrating “high-voltage leak detection” into automated visual inspection Leoni Ransmann and Jan Sende from Syntegon Technology talk about visual inspection of product containers like ampoules, which has been the industry standard for decades, and compare it to modern methods being emphasised in documents like the new EU GMP Annex 1

Upcoming event

Cleanzone Middle East

September 18-19 2025 | Conference | Conrad Dubai, United Arab Emirates See all

You may also like

Analysis

The case for a facility monitoring system

In regulated manufacturing, monitoring environmental conditions and critical equipment is essential to protect product quality, yield, and patient safety. Facilities often use a Facility Monitoring System (FMS) to track factors like airborne particles, temperature, and humidity. Beyond regulatory compliance, FMS delivers real business value through reduced waste, improved yield, higher quality, and greater profitability
Pharmaceutical

300 hours of performance with APSPG-Max

NewAge Industries, Inc., parent company of the AdvantaPure™ line of tubing, hose and quality accessories for the high-purity market, announces the launch of its’ newest line of tubing, AdvantaSil APSPG-Max silicone pump tubing
Design & Build

Kemtile to showcase single source flooring solutions at PPMA 2025

Kemtile is using PPMA 2025 to engage prospective customers on the benefits of coming to an internationally-backed industrial flooring and drainage business with a single source approach to flooring projects across the process and packaging industry
Pharmaceutical

Steriline at CPHI 2025

Flexibility, robotics and customisation for a zero loss approach
Design & Build

AdvanceTEC drives cleanroom innovation & growth with acquisition by Equans

Leveraging scale, global reach, technology, prefabrication & modularisation
Pharmaceutical

Steriline at Pharma Pro&Pack Expo 2025

With its own branch already established in India, Steriline confirms the importance of the Indian and of Asian markets in general for its growth and development
Design & Build

Preserve and protect your cleanroom with a Guardtech Group Cleanroom Service Plan

Suffolk-based construction experts offering elite packages to ensure all service, maintenance and decontamination needs are taken care of
Subscribe now