Flowcal calibrates temperature flow and pressure

Published: 28-Sep-2011
Analysis

Offers accuracy and simplicity

Quantitech’s TCR Tecora Flowcal hand-held calibrator enables fast and accurate calibration of high volume air samplers.

Traceable to UKAS standards, the Flowcal provides a convenient method with which to check the performance of air samplers such as the Echo ambient air particulate sampler. It operates either of two flow cells: a Hi Flow cell, with a range of 150–600 l/min and a Mid Flow cell, with a range of 10–60 l/min.

Quantitech's Dominic Duggan says the device is an ideal accessory for Echo samplers.

“The unit's screen commands guide users through the process, storing data for subsequent transfer to PC,” he says. “As a result it is possible to perform a traceable calibration on any air sampler, in the field and in just a few minutes.”

Quantitech has created a short video showing the calibration procedure, which is available at the Milton Keynes, UK-based firm’s website.

See more

You may also like

Containment

Study raises questions about need for cleanrooms in solar cell production

Read more
A study from Swansea University researchers has raised questions about the need for cleanrooms for perovskite solar cell production, highlighting implications for cost, scalability and design for renewable energy

Trending Articles

  1. Study raises questions about need for cleanrooms in solar cell production A study from Swansea University researchers has raised questions about the need for cleanrooms for perovskite solar cell production, highlighting implications for cost, scalability and design for renewable energy
  2. New Legionella testing selective agar plates launched by AnalytiChem Redipor Legionella agar plate range - specifically designed to support the detection and enumeration of Legionella in water samples
  3. CMR Controls CMR Controls manufactures low pressure and air flow measurement and control systems for standard air conditioning, clean rooms, sterile laboratories, microchip production areas and fume cupboard extract systems.
  4. You need to be a subscriber to read this article.
    Click here to find out more.
    Cleanroom hand tool selection: a practical guide to ISO 14644 compliance John Basso, Director of Marketing at Sonic Tools, explains why verifying hand tool compliance before purchase is essential for maintaining cleanroom standards and avoiding costly disruptions
  5. You need to be a subscriber to read this article.
    Click here to find out more.
    Agar plate desiccation: Causes, consequences, and practical solutions Yoggya De Silva from AnalytiChem company Cherwell, gives a guide to agar plate desiccation in cleanroom monitoring processes

Upcoming event

Making Pharmaceuticals

21-22 April 2025 | Conference | Coventry, UK See all

You may also like

Containment

Study raises questions about need for cleanrooms in solar cell production

A study from Swansea University researchers has raised questions about the need for cleanrooms for perovskite solar cell production, highlighting implications for cost, scalability and design for renewable energy
Containment

Design, contamination & compliance: all in 2 days

As cleanroom standards evolve and technical demands increase, the Cleanroom Technology Conference offers a valuable snapshot of where the industry is heading.
Analysis

New Legionella testing selective agar plates launched by AnalytiChem

Redipor Legionella agar plate range - specifically designed to support the detection and enumeration of Legionella in water samples
Cleaning

Superior environmental performance of reusable mops and wipes demonstrated by an LCA (Life Cycle Assessment)

Findings from the study showcased that reusable solutions for cleaning are significantly better for the environment than single-use solutions
You need to be a subscriber to read this article.
Click here to find out more.
Analysis

Spore.Bio among Google.org AI for science awardees as rapid microbiology platform expands

France-based deeptech startup has been named a Google.org AI for Science awardee and has appointed Dr Michael J. Miller as VP of Scientific and Regulatory Affairs
Analysis

PMM launches condensation control design for contact plates

The manufacturer of culture media for environmental monitoring has developed a new design for contact plates to prevent yellowish condensation
Design & Build

Clever Culture Systems’ AI microbiology tech receives $1m R&D tax incentive

Australian-based company receives large tax incentive for work in microbiology automation, under Australia’s R&D Tax Incentive programme
Subscribe now