BT Cleanroom Engineering completes 1,200 sqm pharmaceutical cleanroom

Published: 13-Feb-2024
Design & Build Pharmaceutical

SyVento BioTech chose Poland-based BT Cleanroom Engineering for its new Biotechnology Research and Development Center

Poland-based BT Cleanroom Engineering has been chosen for SyVento BioTech's new facility.

SyVento BioTech is a biotechnology company offering comprehensive services in the development of lipid-based nanocarriers and LNP technology. The company specialises in the development of lipid-based formulations for pharmaceutical products, including RNA-based drug products.

BT was the general contractor for the Biotechnology Research and Development Center, which included a pharmaceutical cleanroom, a laboratory, and a warehouse and technical area.

The GMP cleanroom area takes up 1,200 sqm of the total facility. The lab and warehouse then take up the further 2,600 sqm.

 

The facility also has:

  • 98,000 meters of cables
  • 48,000 points. controlled by BMS and RMS
  • 7,000 sqm of ventilation channels and fittings

The project began back in March 2023, and was completed in December of the same year.

  • Companies:
  • BT Cleanroom Engineering
  • Syvento
See more

You may also like

Design & Build

A sit down with Telstar about its dual-purpose isolator launch

Read more
Following the launch of Telstar’s new dual-purpose isolator, Product Manager LSE Barrier Systems, John Williams talks to Cleanroom Technology about the launch and its place within a changing sector

Trending Articles

  1. The IoT edge: Elevating cleanroom monitoring to new heights in the era of Pharma 4.0 In the rapidly evolving landscape of pharmaceutical manufacturing, the integration of cutting-edge technologies is not just a trend but a necessity to meet the stringent regulatory standards and ensure the highest quality of products
  2. ChargePoint launches robotic solution for GMP manufacturing ChargePoint Technology has launched a new robotic material handling solution aimed at increasing safety and efficiency in solid-dosage drug manufacturing
  3. What is ISO 8 cleanroom classification? Each cleanroom class is denoted by a maximum concentration of particles per cubic meter or cubic foot of air. ISO 8 is the second lowest cleanroom classification
  4. AVM Group: The history behind the cleanroom industry merger US-based cleanroom and containment expert AVM Group talked exclusively to Cleanroom Technology about the history behind the separate companies and the project collaborations that led to the landmark merger
  5. You need to be a subscriber to read this article.
    Click here to find out more.
    Upperton’s GMP manufacturing facility passes MHRA inspection The GMP manufacturing facility of Upperton Pharma Solutions took 18 months to build, commission, validate and approve

Upcoming event

ISPE Singapore

28-30 August 2024 | Conference and exhibition | Singapore See all

You may also like

Design & Build

A sit down with Telstar about its dual-purpose isolator launch

Following the launch of Telstar’s new dual-purpose isolator, Product Manager LSE Barrier Systems, John Williams talks to Cleanroom Technology about the launch and its place within a changing sector
Design & Build

Shinryo acquires cleanroom provider GMP Technical Solutions

Japan-based Shinryo Corporation has acquired the cleanroom build expert
Design & Build

Airkey customises ISO Class 4 modular semiconductor cleanroom

China-based modular cleanroom expert Airkey has supplied an ISO Class 4 Ultra-clean Modular Cleanroom for semiconductor research and production in Mexico
Containment

The IoT edge: Elevating cleanroom monitoring to new heights in the era of Pharma 4.0

In the rapidly evolving landscape of pharmaceutical manufacturing, the integration of cutting-edge technologies is not just a trend but a necessity to meet the stringent regulatory standards and ensure the highest quality of products
You need to be a subscriber to read this article.
Click here to find out more.
Design & Build

Upperton’s GMP manufacturing facility passes MHRA inspection

The GMP manufacturing facility of Upperton Pharma Solutions took 18 months to build, commission, validate and approve
Containment

ChargePoint launches robotic solution for GMP manufacturing

ChargePoint Technology has launched a new robotic material handling solution aimed at increasing safety and efficiency in solid-dosage drug manufacturing
You need to be a subscriber to read this article.
Click here to find out more.
Design & Build

PAC can now provide Nortek Class 3-5 cleanroom components following partnership

The two US-based companies have partnered on a range of cleanroom components that include Fan Filter Units (FFUs), Air Handling Units (AHUs) and modular ceilings
Subscribe now