ISO/DIS 14644-15 now available from IEST

Published: 14-Apr-2016
Regulatory

Covering the assessment of suitability for use of equipment and materials by airborne chemical concentration


IEST, the Secretariat to ISO Technical Committee 209, Cleanrooms and associated controlled environments, says ISO Draft International Standard (DIS) 14644-15: Assessment of suitability for use of equipment and materials by airborne chemical concentration is now available.

Part 15 of the ISO 14644 Standards Series was spun off from the original equipment standard (ISO/DIS 14644-14) to focus on suitability by airborne chemical concentration.

The new standard includes requirements and guidance for assessing the chemical airborne cleanliness of equipment and materials which are linked to ISO 14644-8. ISO 14644-8 establishes the levels of air chemical cleanliness in terms of airborne concentrations of specific chemical substances (individual, group or category) and provides a protocol to include test methods, analysis, and time-weighted factors within the specification for the level.

  • Companies:
  • IEST Institute of Environmental Sciences and Technology
See more

You may also like

Regulatory

Monitoring Controlled Environments guide now available from IEST

Read more
The new guidance is for "non-classified" environments in regulated industries such as those producing pharma, biotech, medical devices and life science R&D

Trending Articles

  1. What is ISO 8 cleanroom classification? Each cleanroom class is denoted by a maximum concentration of particles per cubic meter or cubic foot of air. ISO 8 is the second lowest cleanroom classification
  2. Nortek Air Solutions CleanSpace relaunches SERVICOR for modular cleanrooms Nortek Air Solutions CleanSpace shared with Cleanroom Technology how SERVICOR for modular cleanrooms, complies with ANNEX 1 requirements, as it was relaunched to meet industry demands for cleanrooms that can achieve the required filtration levels
  3. Considerations in navigating radiopharmaceutical facility design Given the highly individualised nature of radiopharmaceutical products, cleanroom design teams have a lot of specific requirements to take into account. Andy Tyner from SMRT Architects & Engineers discusses
  4. GMP Annex 1: Validation of disinfectants on cleanroom surfaces Published in August 2022, for implementation in August 2023, Karen Rossington from Contec looks at the revised version of EU GMP Annex 1 expanded and clarified the regulatory requirements of cleaning and disinfection in life science cleanrooms
  5. Tips for particle concentration compliance under ISO 14644-1:2015 Apply these six steps to make your cleanroom fit for the new standard, says Hasim Solmaz, Lighthouse Worldwide Solutions

Upcoming event

Pharmig Annual Pharmaceutical Microbiology Conference

20–21 November 2024 | Conference | Nottingham, UK See all

You may also like

Regulatory

Monitoring Controlled Environments guide now available from IEST

The new guidance is for "non-classified" environments in regulated industries such as those producing pharma, biotech, medical devices and life science R&D
Regulatory

ISO revises cleanroom standard on performance test methods

This new document is available from IEST, the Secretariat to ISO Technical Committee 209 (ISO/TC 209)
Regulatory

New ISO 14644 series cleanroom standard now available

One of the ISO 14644 series of cleanroom standards, part 14 covers the assessment of suitability for use of equipment by airborne particle concentration
Regulatory

IEST publishes nanotechnology safety guidance

Aims to minimise risks for cleanroom workers involved in nanotechnology research and production
Regulatory

New ISO 14644 Cleanroom Standard on Cleaning of Surfaces now available

ISO/DIS 14644-13 addresses cleaning to a specified degree on a cleanroom surface
Regulatory

IEST offers new ISO cleanroom classification and monitoring standards

The revised ISO 14644-1 and -2 standards will be available following editorial revision and international translation
Regulatory

Revised ISO 14644 Cleanroom Standards now available from IEST

Revisions now in the final voting stage and could be adopted as early as next month
Subscribe now